CAN Convertor RPM
Support
Find the right wiring, set up the web interface, and keep your CAN Convertor RPM up to date.
What do you need help with?
Installation & wiring
Find the pinout and CE1 or CE2 connection examples for the documented Coil and Digital variants.
Wi-Fi & configuration
Connect to the convertor and open the browser-based settings.
Firmware & updates
Find the firmware ZIP and follow the update steps for firmware and the web interface.
Troubleshooting
Check the convertor’s input readings, RPM output setting, or CAN diagnostic details.
Product manual
Look up RPM output, CAN protocols, speed input, needle sweep and output tests.
Coil or Digital?
Identify the convertor and check which RPM signal your tachometer requires.
Start with these guides
Go straight to the wiring, web settings or firmware procedure.
Additional resources
Find the full PDF, connector reference and earlier firmware changes.
Latest Release
CAN Convertor RPM Firmware v1.3.6
Released:
Review the changes and confirm which firmware package applies to your convertor.
CAN Convertor RPM web interface
Connect to the convertor’s Wi-Fi to check incoming signals, configure outputs and see the installed firmware and filesystem versions.
Can’t find what you’re looking for?
Send us your convertor model and serial number, source ECU, instrument cluster, firmware version and what you see.