VE PRODUCT SUPPORT / FIRMWARE

CAN Convertor DSG Firmware Update

Use the built-in Wi-Fi updater with the correct firmware and filesystem files for your CAN Convertor DSG.

Before you update

Read the DSG release notes and check your model, serial number and installed versions in the web interface. If you have an older or unidentified unit, confirm compatibility with support before choosing a file.

Keep the convertor powered and stay connected during each upload. Selecting or dropping a file starts the update.

Download and identify the files

Download the official CAN Convertor DSG firmware ZIP and extract it before joining the convertor’s Wi-Fi network. This link serves the current published package. Use the main firmware and filesystem files intended for the same release.

Update modeFile name pattern
FirmwareCANConvertorDSG-vX.Y.Z.bin
Filesystem / SPIFFSCANConvertorDSG.spiffs-vX.Y.Z.bin

Update the main firmware

  1. Connect to the convertor’s Wi-Fi and choose Update in the web interface.
  2. Check that the updater shows the CAN Convertor DSG Hardware ID. Set OTA Mode to Firmware.
  3. Select the main firmware .bin file. Wait for the updater to confirm success.
  4. Reconnect to the convertor’s Wi-Fi if needed.

Update the filesystem

  1. Open Update again and select the filesystem option in OTA Mode.
  2. Select the corresponding CANConvertorDSG.spiffs-…bin file and wait for the uploader to confirm success.
  3. Reconnect if needed and check the firmware and filesystem versions on Home or Information.

If an upload fails, contact support with the file name, convertor model and the message the updater displayed.