Haldex Controller Gen4 Plug-and-Play Wiring Harness

€ 75,00 excl. tax

Replacement plug-and-play wiring harness for the VE Haldex Controller Gen4. Suitable for compatible Volkswagen and Audi Gen4 Haldex vehicles, including the Golf Mk6 R, Audi S3 8P facelift, RS3 8P and TT RS 8J.
Ideal for replacing damaged wiring or transferring your existing controller to another compatible vehicle. Connects directly to the original Haldex wiring without cutting or modifying factory wires.

SKU: HDC-LOOM-PNP-G4 Category: Tags: ,
Brand: VAG
Haldex Type: Gen4
Wiring loom: Plug and Play
Haldex Controller Gen4 Plug and Play Harness

Haldex Controller Gen4 Plug-and-Play Wiring Harness

€ 75,00 excl. tax

In stock

Description

Haldex Controller Gen4 Plug-and-Play Wiring Harness

This replacement plug-and-play wiring harness is designed for the VE Haldex Controller Gen4, allowing straightforward installation in compatible vehicles equipped with a fourth-generation Haldex AWD system.

The harness connects inline with the vehicle’s original Haldex wiring, providing the necessary connections for the VE Haldex Controller without cutting, soldering or modifying the factory wiring.

Whether you’re replacing a damaged wiring loom or transferring your existing VE Haldex Controller to another compatible vehicle, this harness provides a convenient installation solution while retaining the original Haldex electronics.

Key Features

  • Plug-and-Play Installation: Connects directly to the original Haldex wiring using matching factory-style connectors.
  • No Factory Wiring Modifications: No cutting, soldering or splicing required.
  • Replacement or Transfer: Ideal for replacing damaged wiring or moving an existing controller to another compatible vehicle.
  • Original Haldex System Retained: The original Haldex control module and factory electronics remain installed and connected.
  • Easy Removal: The harness can be disconnected without permanently modifying the vehicle wiring.
  • Gen4 Compatibility: Designed for the VE Haldex Controller Gen4 in supported VAG plug-and-play installations.

Vehicle Compatibility

Suitable for compatible Volkswagen, Audi, SEAT and Škoda vehicles equipped with a Gen4 Haldex system, including:

Audi

  • Audi A3 8P Quattro facelift (0BR)
  • Audi S3 8P Quattro facelift (0BR)
  • Audi RS3 8P (0BY)
  • Audi TT / TTS 8J facelift (0BR)
  • Audi TT RS 8J (0BY)
  • Audi Q3 8U Quattro, early Gen4 models (0AY)

Volkswagen

  • Volkswagen Golf Mk6 R 4Motion (0BR)
  • Volkswagen Passat / CC 4Motion, compatible Gen4 models

Other Gen4 vehicles may also be compatible, depending on their original wiring and connector configuration.

Important: Haldex generations and connector configurations can vary by vehicle model and production year. Some vehicles require a different wiring harness or a standalone installation. Confirm the Haldex generation and connector configuration before ordering.

View Haldex Controller Compatibility List

Installation

The plug-and-play harness connects inline with the original vehicle Haldex wiring.

On compatible vehicles such as the Volkswagen Golf Mk6 R and Audi S3 8P facelift, the connection is typically located beneath the rear seat.

  1. Locate and disconnect the original Haldex wiring connector.
  2. Insert the plug-and-play harness between the original connectors.
  3. Route the additional wiring to the desired controller mounting location.
  4. Connect the VE Haldex Controller Gen4 and secure the wiring.

The original vehicle wiring remains intact.

For detailed instructions and installation photos, see the Gen4 Plug-and-Play Installation Guide.

Looking for the Complete Gen4 Plug-and-Play Kit?

This product includes only the replacement wiring harness and does not include the VE Haldex Controller.

If you don’t already have a controller, the complete VE Haldex Controller Gen4 Plug-and-Play Kit includes both the controller and the required wiring harness, providing everything needed for installation in a compatible vehicle.

View the Complete Haldex Controller Gen4 Plug-and-Play Kit

What’s Included?

  • 1× VE Haldex Controller Gen4 Plug-and-Play Wiring Harness

Please note:

  • The VE Haldex Controller is not included.
  • This is a replacement wiring harness, not a complete controller kit.
  • Only suitable for the specified Gen4 plug-and-play installation.
  • Other Haldex generations and certain vehicle-specific installations require a different wiring harness.

Additional information

Weight 0,2 kg
Brand

VAG

Haldex Type

Gen4

Wiring loom

Plug and Play

Reviews

There are no reviews yet.


Be the first to review “Haldex Controller Gen4 Plug-and-Play Wiring Harness”

Related Products

FEATURED PRODUCTS

BEST SELLING PRODUCTS

LATEST PRODUCTS

TOP RATED PRODUCTS