Release version 1.3.18

12-10-2023

Bugs:
– Gen2, Gen4, Gen5 0AY, no data send to car causing lights on dash.

Launch Control lock to 50/50 removed.

Release version 1.3.17

26-9-2023

Bugs:
– Gen5 0AY Fault code fix
– PQ CAN ABS Speed output signal fix
– MQB CAN fix for gateway fault code 131599 – Control Module for All Wheel Drive Clutch U0114 00 [009] – No Communication
– Correction for default track map max speed and throttle was 100/0 set to 50/50

Feature:
– Saab Haldex Gen4 support added
– VAG Haldex Gen1 extended torque values added
– VAG Haldex Gen5 0CQ extended torque values added
– CAN protocol Saab added
– CAN Protocol MaxxECU added
– CAN Protocol Haltech added
– CAN Protocol KMS added
– CAN MQB data added – Hazardlight
– CAN MQB data added – Drive mode
– CAN MQB data added – Haldex drive mode
– CAN PQ data added – Hazardlight
– CAN PQ data added – Drive mode
– Bluetooth data message added for additional car data
– Burnout mode on Hazardlight (also parkingbrake)

– Speed mode changes:
Speed intervals can be changed
3 Presets can be made to have 3 different maps available for fast switching
Default map and intervals can be loaded

Release version 1.3.15

Bugs:
– Gen4 Missing engine message in passthru mode
– CAN Timing adjustment
– Output 2 RPM output PWM correction

Feature:
– CAN Trace function
– Output 2 enable switch

Release version 1.3.14

Feature:
– Canbus protocol input added EmuBlack 1000k
– Canbus protocol input added Megasquirt 500k
– Canbus EmuBlack brake signal
– Volvo Haldex real pressure value in input debug

Bugs:
– Bug with reverse signal setting haldex to 100/0 random
– PQ Brakepressure value correction
– PQ 4 Wheel speeds value correction
– MQB Brakepressure value correction
– Track mode speed interval value
– Track mode throttle interval value not saved correct

Release version 1.3.13

Feature:
– MQB CAN wheel speed values added
– Gen5 Traction mode selection adde
– Haldex model detection added
– Manual switch option Track mode added
– Volvo haldex temperature OBD request added
– Volvo P2 Gen2 added
– Volvo P2 Gen3 added
– CAN input Volvo P2, P3, P1 added
– Signal diagnostics added

Bugs:
– Engine temperature value corrected
– MQB Gen5 0CQ missing message fixed
– MQB CAN Parkingbrake input fixed
– Various small bug fixes

Release version 1.3.11

Feature:
– Gen2 Extended values added

Bugs:
– Gen2 Lock issue on start

Release version 1.3.9

Feature:
– Boost Pressure PQ
– Brake Pressure PQ

Release version 1.3.8

– Handbrake before LC

Release version 1.3.7

– Update bug fixed
– Gen5 0CQ Haldex temperature OBD request added
– Brake pressure added

Release version 1.3.6

Feature:
– Manual switch default settings on Reset
– Popup message on Reset
– Track Settings clear speed interval to default 30km/h
– Track Settings clear speed interval activate to default off
– Map advanced steering angle bug

Release version 1.3.5

Feature:
– More MQB car canbus data added
– MQB Steering angle added
– Gen5 0CQ now fully supported no more time issues
– Gen5 0CQ standalone also supported
– Recording function to record car data
– Option to disable Haldex on Reverse (only DSG)
– Option to disable Haldex on Parking based on custom speed and steering angle
– Launch Control set Haldex to 50/50 (only DSG)
– New Mode Track

Bug:
– Gen5 0CQ Parkingbrake not setting haldex to OFF

Release version 1.2

– Performance improvements
– New mode Map

Release version 1.1.2

– Performance improvements
– Bug Manual switch position on settings page not correct
– Gen5 OAY support