Haldex Controller<\/p>\n
Haldex Performance Controller to have full control of the Haldex 4Motion system. Used in Dragrace, Track race, Street race and Daily driving. The Haldex Controller can be used in original 4Motion car with a plug and play solution or run the Haldex in a standalone solution in any car from a Golf MK1 to newest cars. The standalone solution does not need any other sensors like the ABS
\nAll controls will be done with the Haldex Controller App. Switching driving modes, creating Maps and viewing Haldex data.
\nThe system is fully plug and play for all Haldex models. No need to change or replace parts of the Haldex so the Haldex Controller can be removed just as easy and installed in another car.
\nAlmost all VAG Haldex systems are supported Gen1, Gen2, Gen4, Gen5 0AY, Gen5 0CQ.<\/p>\n
Used defined characteristic with different operating modes:
\nHaldex Off
\nStock mode
\nLock Haldex 100\/0 to 50\/50
\nMap based on Throttle signal
\nMap based on Speed signal
\nMap based on Boost signal
\nMap based on Throttle and Speed signal<\/p>\n
Lots of overall options:
\nStartup mode last used or fixed mode
\nHaldex disengage on handbrake
\nHaldex disengage on Brake
\nBrake ignore
\nAnd more<\/p>\n
The Haldex Controller comes with a control unit a solid and waterproof housing that can be placed inside the trunk or outside the car if needed. Wiring loom set inline plug and play for all original 4Motion cars or a standalone wiring set that has long wires to connect all manually when there is no connection available. The App is free and available in the App store.
\nThe App will show live information about the Haldex system like how much torque is transmitted to the rear wheels. The App interface is also used to change all settings in the controller and to create Haldex configurations and maps.
\nThe Haldex Controller does not replace the existing Haldex Controller unit and can only be used with a fully working existing haldex controller<\/p>\n
<\/p>\n
More information about the Haldex Controller:<\/p>\n